EB-24X is a complete GPS sub-system with 30 x 30 mm2. Equipped with antenna, back up battery and GPS engine, it provides superior navigation performance under dynamic conditions in areas with limited sky view like urban canyons. High sensitivity up to -158dBm for weak signal operation without compromising accuracy. EB-24X is your best choice for embedded applications.

Вы можете задать вопрос, заполнив форму обратной связи  

Features: 

Compact form factor: 30 x 30 x 8.5 mm 
Lead-Free - RoHS/WEEE compliant 
Tracks 51-Channel of satellites 
Fast Position Fix 
Low power consumption 
3.3Vdc supply voltage 
6 pin UART port 
Build-in re-chargeable backup battery 
Applications: 

Handheld devices 
Automotive and Marine Navigation 
Automotive Navigator Tracking 
Emergency Locator 
Geographic Surveying 
Personal Positioning 
Sporting and Recreation 
Embedded applications : PDA, AVL, UMPC, PND, MP4 
EB Series Selection Guide
  
Product Catalog 
Specification Description 
General L1 frequcney, C/A code (SPS)
51 independent tracking channels 
Sensitivity -158dBm /Tracking; -146dBm /Acquisition 
Update Rate Up to 5Hz 
Accuracy Without aid: 3.0m 2D-RMS
<3m CEP (50%) without SA (horizontal)
DGPS (WAAS, EGNOS, MSAS, RTCM): 2.5m 
Acquisition (open sky) Cold Start : 36 sec
Warm Start : 33 sec 
Hot Start : 1 sec  
Reacquisition < 1sec 
Dynamic Altitude : 18000m (max.)
Velocity : 515m/sec (max.) 
Acceleration :4G (max.)  
Supply Voltage DC 3.0~6 V 
Power Consumption 30mA @ 3.30V / Tracking 
Backup Battery Build-in 
NMEA Message NMEA0183 v3.1 baud rate 4800/9600/... /57600, default 9600
Selectable Output: GGA, GLL,GSA, GSV, RMC, and VTG 
Datum Default WGS-84 
Antenna Build-in 25*25*(4 or 2)mm patch antenna, right hand circular polarization, 50ohm 
Signal Level Low Voltage TTL or RS-232 
Connector DIP or Wafer connector, pitch 1.0mm directional wire to board connector. (See below ordering information) 
Operating Temperature -30°C to 85°C 
Storage Temperature -40°C to 85°C 
Operating Humidity ?95%, non condensing 
Dimension 30 x 30 x 8.5(H) mm max (See below ordering information) 
* Specifications subject to change without prior notice. 

Product Antenna Signal Level Connector Dimension 
EB-240 TD 2mm Low Voltage TTL PIN Header 30 x 30 x 6.5(H) mm 
EB-240 TW 2mm Low Voltage TTL Wafer 30 x 30 x 6.5(H) mm
EB-240 RD 2mm RS-232 PIN Header 30 x 30 x 6.5(H) mm 
EB-240 RW 2mm RS-232 Wafer 30 x 30 x 6.5(H) mm 
EB-241 TD 4mm Low Voltage TTL PIN Header 30 x 30 x 8.5(H) mm
EB-241 TW 4mm Low VoltageTTL Wafer 30 x 30 x 8.5(H) mm 
EB-241 RD 4mm RS-232 PIN Header 30 x 30 x 8.5(H) mm
EB-241 RW 4mm RS-232 Wafer 30 x 30 x 8.5(H) mm 

EB-24X Engine Board datasheet.pdf
Скачать заявку